Volvo VOCOM II and Premium Tech Tool (PTT) 2.7 is the latest diagnostic tool for Volvo Heavy Duty Diagnostic and programming. Premium Tech Tool is available as a connected version or as an unconnected version.
Volvo VOCOM II 88894000 with APCI PTT 2.7.25 Tech Tool

Premium Tech Tool vocom developer tool:
1. Dealer tool to access and program parameters in Level2 and Level3 without connecting to central severs;
2. Works with Tech Tool (VCADs Pro), Normal or Development mode, support 28 languages;
3. Support all brands and models supported by Tech Tool (VCADs Pro 3.06);
4. Make programmable more than 11000 parameters;
5. Program speed limit, change chassis ID, disable immobilizer;
6. Change minimum/maximum values of parameters, for example: increase speed limit;
Premium Tech Tool (PTT) is an application for the Aftermarket, developed to support efficient service and diagnosis. Premium Tech Tool is available as a connected version or as an unconnected version. The unconnected version is called Premium Tech Tool Connectionless (PTTC) and that is that we offer. PTTC is used in workshops that do not have internet access, but both versions are referred to as PTT. PTT provides access to the Guided Diagnostics and VCADS.

ABOUT Volvo VOCOM II 88894000:
Vocom Communication Unit is designed with focus on robustness and durability to withstand the tough workshop environment.
·Improved LED indicators
·Improved quality of cables
·Military standard on connectors
·Better liquid and dust ingress protectors
·Metal casing and rubber bumpers for better robustness
Vocom Key Facts Parts no. for Vocom Cables
Temperature Range: -40° – +85° (Wlan-20°- +65°) Protection Class: IP55
Shock Resistance: 2m
RoHS Conformance: Yes
Wlan: 802.11 b/g
Dev2tool is the Dealer tool to access and program parameters in Level2 and Level3 without connecting to central severs;
Works with Tech Tool (VCADs Pro), Normal or Development mode, support 28 languages;
Support all brands and models supported by Tech Tool (VCADs Pro);Make programmable more than 11000 parameters.
Program speed limit, change chassis ID, disable immobiliser;
Change minimum/maximum values of parameters, for example:increase speed limit;
The new rugged Communication Unit Vocom 88890300 for the tough workshop environment and field service.

TRUCK COVERAGE:
Volvo Trucks – Older electrical system, Vehicle electrical system ’98; VERSION2, VERSION3; VERSION4 – FH4/FM4;
Volvo Buses – Conventional, Multiplexed, Multiplexed v2, Multiplexed v3;

Volvo Construction Equipment:
Volvo Penta, Marine engines – VERSION2, VERSION3;
Volvo OEM Component Customer – VERSION2, VERSION3;
Mack Trucks – V-MAC I/II/III, ITC, IV, IV+;
Renault Trucks – VERSION2, VERSION3, VERSION4; (EURO 6, DXI, DTI)
UD Trucks – VERSION2, VERSION3.

For Volvo Vocom Trucks:
AC Compo4 F10 F12 F16 FE FH FH12 FH16 FH565 FL FL10 FL12 FL6 FL7 FM FM10 FM12 FM9 FM7 Nh12 NH525 NH565 NL10 Nl12 VAh VHD Vm VN VT WC WG WI WX

For Volvo buses:
B10B B10L B10M B10R B11R B12 B12B B12M B12R B13R B58 B5LH B5RH B6 B6R B7FB B7L B7R B9L B9R B9S B9TL BXRC COMP12
PREVH PREVX OLYMPIAN SUPEROLY
Construction Equipment

Wheel Loader:
L110E L110F L110G L120E L120F L120G L150E L150F L150G L180E L180F L180G L220E L220F L220G L250G L330E L350F L45F-TP L45F-TPS L50F-TP L50F-TPS L50G-TP L50G-TPS L60E L60F L60G L70E L70F L70G L90E L90F L90G

Articulated Hauler:
A25D A25E A25F A30D A30E A30F A35D A35E A35F A40D A40E A40F T450D

Excavator:
EC135B EC140B EC140C EC140D EC160B EC160C EC160D EC180B EC180C EC180D EC200B EC210B EC210C EC235D EC240B EC240C EC250D EC290B EC290C EC300D EC330B EC330C EC340D EC360B EC360C EC380D EC460B EC460C EC480D EC700B EC700C ECR145C ECR235C ECR235D ECR305C EW140B EW140C EW140D EW145B EW160B EW160C EW160D EW180B EW180C EW180D EW200B EW210C EW210D EW230C FB2800C FBR2800C FC2121C FC2421C FC2924C FC3329C PL3005D PL4608 PL4808D PL7015

Grader:
G710B G720B G726B G730B G740B G746B G780B G930 G930B G940 G940B G946 G946B G960 G960B G970 G976 G990

Skid Steer Loader:
MC110B MC60B MC70B MC80B MC90B

Compact Excavator:
EC55C EC80D ECR88 EW60C

Paver:
ABG7820B ABG8820B P7820C L882C

Other:
CARETRAC

Package includes:
1pc x Vocom 88890300 interface
1pc x 88890305 USB Cable
1pc x 88890304 OBD Cable
1pc x 88890306 FCI/8 PIN Cable
Welcome to contact with us: Service@autonumen.com , or you can check on our store: autonumen.com .Thanks!

https://obd2scantool.us/2023/03/07/latest-diagnostic-tools-volvo-vocom-ii-and-premium-tech-tool-ptt-2-7/

Guidelines for Using JLR CCF Tools and VBF Editor：
JLR CCF (Control Configuration Files) tools and VBF (Vehicle Bus File) editor are software applications specifically designed for Jaguar Land Rover dealerships to configure and program vehicle control modules. These tools are only meant to be used by trained and certified technicians who have a working knowledge of vehicle systems and their components.

JLR SDD (Jaguar Land Rover Standard Diagnostic Device) Pathfinder is a software application used by Jaguar Land Rover dealerships for diagnosing and repairing vehicle systems. It allows technicians to access vehicle diagnostic information and perform various functions, such as reading and clearing fault codes, programming modules, and checking system status.

Here is a step-by-step guide to using the JLR CCF tools and VBF editor:
Step 1: Connect Diagnostic Device to Vehicle
Connect the JLR Standard Diagnostic Device to the vehicle’s OBD-II (On-Board Diagnostic) port.
Step 2: Launch JLR SDD Pathfinder
Launch the JLR SDD Pathfinder software and select the appropriate module that needs to
Step 3: Load CCF or VBF File
Load the relevant CCF or VBF file into the tool.
Step 4: Make Changes to Configuration or Programming
Using the CCF or VBF editor, make the necessary changes to the configuration or programming.
Step 5: Save Updated File to Diagnostic Device
Save the updated file to the diagnostic device.
Step 6: Upload File to Vehicle Control Module
Upload the updated file to the vehicle control module using the diagnostic device.
Step 7: Verify Changes
Verify that the changes have taken effect by performing a system test or checking for fault codes.

Conclusion
The CCF tools and VBF editor are powerful tools for configuring and programming vehicle control modules, but their use requires specialized training and certification. By following the steps outlined above, trained and certified technicians can effectively use these tools to diagnose and repair vehicle systems.

More interesting for JLR SDD software , welcome to check https://www.autonumen.com .

https://autotool.us/2023/02/28/guidelines-for-using-jlr-ccf-tools-and-vbf-editor/

What is New Holland Electronic Service Tools?

Electronic Service Tool (EST) Engineering Level* (software only) – used by New Holland dealer technicians to connect with vehicles that have a Controller Area Network (CAN) BUS.

New Holland Electronic Service Tool Function List:
Check the status of parameters;
• Retrieve faults;
• Run diagnostic tests;
• Make ECU and parameter programming;
• Monitor active and logged diagnostics;
• View and change ECU configuration;
• View diagnostic procedures and schematics.
• Troubleshoot problems;
• Use assist database;
• Run scope diagnostics;

E.A.S.y – additional engine diagnostic and download tool for connection directly to ECU to perform diagnostic, programming and ECU reload by K-Line protocol.

CNH Engine Download Tool operates from within the EST program to perform the following engine download operations:
• Provide Engine Control Unit (ECU) programing update capability;
• Provide blank ECU initialization and programming capability;
• Provide ECU programming reassignment for blank and other ECUs;
• Provide ECU download crash recovery.

The brand new version of New Holland CNH EST works with OS Windows 10 64 bit / 11 64 bit, except Home editions). If you have windows 7/ 8, we can offer you a previous version of CNH EST, as the 9.6/9.7 versions no longer support Windows 7 / 8and in some cases won’t even loading.

New Holland Electronic Service Tool Support Languages:
English, Spanish, Italian, Mexican, German, Norwegian, Russian, French

New Holland Electronic Service Tool Supported Brands:
New Holland (Agriculture and Construction);
New Holland FK (Fi at-Kobelco);
New Holland O&K (Orenstein & Koppel);
CASE (Agriculture and Construction);
STEYR;
KOBE-LCO;
Iveco (Astra) (articulated dump trucks only);
Flexi-Coil;
Sumitomo (S.H.I.)

CNH EST 9.6 Diagnostic Software：
https://mega.nz/folder/59sXha6I#Le4MirE5nmU11SiU5u9fBA

CNH 9.7 software download link :
https://mega.nz/folder/Hi5mWZ7b#FjJb0VlXAL1MMLkSLzK0gA

New Holland Electronic Service Tool 9.2 Update:

Case IH AG:
-New Engine Datasets for the following Machines with FPT engines
oEDC17C49 Engine Controller Datasets
•5802804074 -FARMALL 55A (Tier 4A)
•5802804075 -FARMALL 65A (Tier 4A)
•5802804076 -FARMALL 75A (Tier 4A)

New Holland AG:
-New Engine Datasets for the following Machines with FPT engines
oEDC17C49 Engine Controller Datasets
•5802804074 -T4S.55 / WORKMASTER55 / T3.60F (Tier 4A)
•5802804075 -T4S.65 / WORKMASTER 65 / T3.70F (Tier 4A)
•5802804076 -T4S.75 / WORKMASTER 75 / T3.80F(Tier 4A)

Case CE Heavy:
-Wheel Loaders (Models 521G, 621G, 721G, 821G, 921G, 1021G, 1121G) (Tier 4B / Tier 2)
oColor Display-Vehicle Support (GDSP) software version 1.11.0.0; part number 51447685

New Holland CE Heavy:
-Wheel Loaders (Models W110D, W130D, W170D, W190D, W230D, W270D, W300D) (Stage V)
oColor Display-Vehicle Support (GDSP) software version 1.11.0.0; part number 51447685

New Holland CE Light:
-Wheel Loaders (Models W110D, W130D, W170D, W190D, W230D, W270D, W300D) (Stage V)
oColor Display-Vehicle Support (GDSP) software version 1.11.0.0; part number 51447685

https://www.autonumen.com/goods-6874-New-Holland-Electronic-Service-Tools.html